Heaters – Inline & Submersible | Designing & Building Aquatic Filtration and Tank Systems for Your Specific Needs

Heaters – Inline & Submersible

June 13, 2011 | Author wponlinestore

Integrated-Aqua™ offers In-Line and submersible heaters suitable for use on all aquatic systems including fresh and saltwater. We provide a variety of heater configurations and sizes for every application.

In-Line Heaters

Our Pure Titanium In-Line Heaters are manufactured with the highest quality components and are designed for safety and efficiency. Titanium housing and heating elements provide outstanding resistance to fatigue and corrosion, low density and excellent strength. Titanium is considered to be physiologically inert and is suitable for both fresh and saltwater applications. All units come fully equipped with digital control for precise temperature control. Standard features include a highly sensitive flow switch, high limiting safety thermostat and integral contractor / relay. They are easy to install with the option of water from from either direction.

Titanium In-Line heaters are available from 1.5-8 KW

Key Features

Pure Titanium flow Tube & Element(s)
Digital Temperature Display & Control
External Reversible Flow Switch
High Limiting Safety Thermostat
Integral Contactor / Relay
Circuit Protection Delay Switching
Indoor or Outdoor use

Technical Specifications

Main Tank – PURE Titanium
Heating Element – PURE Titanium
Control Thermostat – 0°F-90°F with 1° differential
High Limit Safety – 122° Manual Rest
Minimum Flow Requirement – 256-gph
Maximum Flow Velocity – 2560-gph

HTI – Pure Titanium Models

Model Number	KW	Volts	Phase	Amps	Length x Width x Height	Bolt “on center” Width (in)
HTI-1.5-115	1.5	115	1	13	23″ x 6″ x 8.5″	12.5″
HTI-2-115	2	115	1	17.4	23″ x 6″ x 8.5″	12.5″
HTI-2-220	2	220	1	9	23″ x 6″ x 8.5″	12.5″
HTI-3-220	3	220	1	13.6	23″ x 6″ x 8.5″	12.5″
HTI-4-220	4	220	1	18	23″ x 6″ x 8.5″	12.5″
HTI-6-220	6	220	1	27	23″ x 6″ x 8.5″	16.5″
HTI-6-220-3	6	220	3	24	27″ x 6″ x 8.5″	16.5″
HTI-8-220	8	220	1	36.4	27″ x 6″ x 8.5″	16.5″
HTI-8-220-3	8	220	3	33	27″ x 6″ x 8.5″	16.5″

*Please contact us for information about stainless steel inline heaters.

Submersible Heaters

We offer submersible heaters from 1-18 KW for applications of all sizes. These heaters feature durable construction, moisture resistant heads and built in safety features to provide safe and efficient temperature regulation.

Immersion heaters come with an eight-foot (2.5m) electric cord (plug not included) in all sizes up to 3500 watts. Sizes 5000 watts and higher come with electrical wire and conduit.
Our immersion heater line includes the EasyPlugTM line of heaters designed for easy plug-in installation.

Process Technology heaters are available in stainless steel for fresh water or titanium for salt water. All of these heaters are UL listed (USA), CSA certified (CN), and CE compliant (EU) for your peace of mind.

The heaters also come with a built-in heat sensitive temperature fuse for safety. The fuse comes pre-wired in the head of the heater in series with the power wires. If the heater is operated out of water, and the heater overheats, the fuse trips and the heater will shut off automatically. If this occurs, the fuse must be replaced in order for the heater to operate again. This device minimizes the potential for the heater to be a fire hazard should it be operated improperly.

Please contact us for help with sizing and model selection.