MicroBead™ Biofilters

View / Download our MicroBead™ Biofilters Product Page

HTE Biofilter System

HTE Biofilter System

The MicroBead™ Biofilter (MBB) is a patented technology (patent number 6,666,965) that has been successfully implemented in commercial recirculating aquaculture systems since the early 1990’s. MBB Technology has proven itself as an extremely efficient, practical and cost effective biofilter solution for a wide range of aquatic applications including research, commercial and display aquaria.

The MicroBead™ Biofilter combines processes for CO2 stripping, oxygenation, nitrification, and fine solids capture into a single compact unit. MBB’s are operated in a downflow configuration where influent water is distributed over the top of the media bed. The water then trickles down through the media and gravity flows water out of the reactor vessel. Low-cost granular polystyrene biomedia provides an extremely high surface area per unit volume of roughly 1,200 ft2/ft3 (3936 m2/m3). Maximimum nitrification capacity in achieved in a small footprint. MBB’s have nitrification rates similar to high-rate fluidized bed biofilters, however the MBB™ has significantly lower capital and operating costs.

MicroBead™ Biofilters have several key advantages compared to traditional fluidized bed biofilters. Firstly, MBB’s will not “crash” during inevitable power outages or pump failures. The nitrifying bacteria that resides on the highly bouyant microbead media will survive for prolonged periods and remain aerobic even during temporary periods with little or no flow. Conversely, fluidized bed biofilters will turn anaerobic within 15-20 minutes of a loss of flow and nitrifying bacteria will rapidly begin to die. This event subsequently produces toxic hydrogen sulfide, which, when reintroduced into the culture tank on restart, is toxic to fish and can cause fish kills. For the safety of your valuable livestock, this is a crucial consideration!

MBBs’ cost of operation is roughly 50% less than traditional fluidized bed biofilters and pressurized bead filters. This is due to the ability of the non-pressurized MBB to operate with minimal hydraulic head pressure which allows use of low head pumps, minimizing pumping costs.

The capital cost of MBBs is also significantly less than comparable biofilter technologies since it does not use expensive plastic bead biomedia, pressurized vessels or complicated internal manifolds. Smaller scale MBBs are constructed with heavy-duty non corrosive materials that will last for many years in the harshest of conditions. The MicroBead™ Biofilter is a simple, efficient, safe, completely scalable, and cost-effective biofilter that can be applied to a wide range of recirculating aquaculture applications. Call us today for sizing assistance and to request a quote.

Biofilter - MBB 24

Biofilter - MBB 24

MBB systems are 100% scalable to any size recirculating system and are sized to attain desired water quality conditions a wide range of aquatic systems including:

  • Aquaculture Research Systems
  • Commercial Aquaculture Systems
  • Seafood Holding Systems
  • Public Display Aquaria
  • Breeding Centers
  • Broodstock Holding Systems

Units can be easily retrofitted into existing facilities or packaged as part of a complete recirculating system.

 

Max Feed Rates: (lbs per day w/ 48% protein dry feed)

Model
No.

Dimensions
(Diam.
x Ht.)

Flow
Rate
(GPM)

Air
Req.
(CFM)

warm
water
68
deg. F

cool
water
52-59 deg. F

cold
water
46-50 deg. F

MBB-12
12″
x 96″
17
25
3.4
3.3
2.3
MBB-18
18″
x 96″
39
40
7.7
7.3
5.1
MBB-24
24″
x 96″
69
80
13.7
13.1
9.1
MBB-36
36″
x 96″
155
175
30.8
29.4
20.6
MBB-48
48″
x 96″
275
300
54.8
52.2
36.5

3 Responses to “MicroBead™ Biofilters”