Temperature Control

Aquarium Heat Pumps

Introducing our newest line of heat pumps from 1/10 hp – 3 hp. The CW series includes high-quality helical, titanium heat exchangers for use in saltwater or freshwater . Units include built-in digital temperature controllers with dependable accuracy of +/- 2 degrees Fahrenheit. Models are available in 50Hz or 60Hz to meet international or domestic electrical requirements. These are quiet, durable, compact, and affordable chillers that are perfect for laboratory and aquaculture research applications.  

CW-3000 – 3 hp Chiller Unit

  • Dimensions: 28.5″ x 20″ x 27.5″ (LxWxH)
  • Inlet / Outlet: 1-1/2″
  • Flow required: min 3500 gph
  • Electrical: 220V – 50/60Hz
  • Noise rating: 75 db

CW-2500 – 2 hp Chiller Unit

  • Dimensions: 21.5″ x 25″ x 21″ (LxWxH)
  • Inlet / Outlet: 1-1/4″
  • Flow required: min 2000 gph
  • Electrical: 220V – 50/60Hz – 22 amps
  • Noise rating: 75 db

CW-1000 – 1 hp Chiller Unit

  • Dimensions: 21″ x 19″ x 15″ (LxWxH)
  • Inlet / Outlet: 1″
  • Flow Required: min 1000 gph
  • Electrical: 220V – 50/60Hz
  • Noise rating: 60 db
  • CW-0500 – 1/2 hp Chiller Unit

  • Dimensions: 15″ x 19.5″ x 15.5″ (LxWxH)
  • Inlet / Outlet: 3/4″
  • Flow Required: min 750 gph, max 1500 gph
  • Electrical: 115/220V – 50/60Hz
  • Noise rating: 60 db

Heat Pump Selection Chart

Model
HP
Inlet/Outlet
Electrical
Dimensions
(L x W x H)
Noise
Rating
CW-3000
3
hp
1-1/2″
220V-50/60Hz
28.5″
x 20″ x 27.5″
75
db
CW-2500
2
hp
1-1/4″
220V-50/60Hz
21.5″
x 25″ x 21″
75
db
CW-1000
1
hp
1″
220V-50/60Hz
21″
x 19″ x 15″
60
db
CW-0500
1/2
hp
3/4″
115/220V-50/60Hz
15″
x 19.5″ x 15.5″
60
db

Heaters – Inline & Submersible

Integrated-Aqua™ offers In-Line and submersible heaters suitable for use on all aquatic systems including fresh and saltwater. We provide a variety of heater configurations and sizes for every application.

In-Line Heaters

Our Pure Titanium In-Line Heaters are manufactured with the highest quality components and are designed for safety and efficiency. Titanium housing and heating elements provide outstanding resistance to fatigue and corrosion, low density and excellent strength. Titanium is considered to be physiologically inert and is suitable for both fresh and saltwater applications. All units come fully equipped with digital control for precise temperature control. Standard features include a highly sensitive flow switch, high limiting safety thermostat and integral contractor / relay. They are easy to install with the option of water from from either direction.

Titanium In-Line heaters are available from 1.5-8 KW

Key Features

  • Pure Titanium flow Tube & Element(s)
  • Digital Temperature Display & Control
  • External Reversible Flow Switch
  • High Limiting Safety Thermostat
  • Integral Contactor / Relay
  • Circuit Protection Delay Switching
  • Indoor or Outdoor use

Technical Specifications

  • Main Tank – PURE Titanium
  • Heating Element – PURE Titanium
  • Control Thermostat – 0°F-90°F with 1° differential
  • High Limit Safety – 122° Manual Rest
  • Minimum Flow Requirement – 256-gph
  • Maximum Flow Velocity – 2560-gph

HTI – Pure Titanium Models

Model
Number
KW
Volts
Phase
Amps
Length
x Width x Height
Bolt “on center”
Width (in)
HTI-1.5-115
1.5
115
1
13
23″
x 6″ x 8.5″
12.5″
HTI-2-115
2
115
1
17.4
23″
x 6″ x 8.5″
12.5″
HTI-2-220
2
220
1
9
23″
x 6″ x 8.5″
12.5″
HTI-3-220
3
220
1
13.6
23″
x 6″ x 8.5″
12.5″
HTI-4-220
4
220
1
18
23″
x 6″ x 8.5″
12.5″
HTI-6-220
6
220
1
27
23″
x 6″ x 8.5″
16.5″
HTI-6-220-3
6
220
3
24
27″
x 6″ x 8.5″
16.5″
HTI-8-220
8
220
1
36.4
27″
x 6″ x 8.5″
16.5″
HTI-8-220-3
8
220
3
33
27″
x 6″ x 8.5″
16.5″

*Please contact us for information about stainless steel inline heaters.


Submersible Heaters

We offer submersible heaters from 1-18 KW for applications of all sizes. These heaters feature durable construction, moisture resistant heads and built in safety features to provide safe and efficient temperature regulation.

Immersion heaters come with an eight-foot (2.5m) electric cord (plug not included) in all sizes up to 3500 watts. Sizes 5000 watts and higher come with electrical wire and conduit.
Our immersion heater line includes the EasyPlugTM line of heaters designed for easy plug-in installation.

Process Technology heaters are available in stainless steel for fresh water or titanium for salt water. All of these heaters are UL listed (USA), CSA certified (CN), and CE compliant (EU) for your peace of mind.

The heaters also come with a built-in heat sensitive temperature fuse for safety. The fuse comes pre-wired in the head of the heater in series with the power wires. If the heater is operated out of water, and the heater overheats, the fuse trips and the heater will shut off automatically. If this occurs, the fuse must be replaced in order for the heater to operate again. This device minimizes the potential for the heater to be a fire hazard should it be operated improperly.

Please contact us for help with sizing and model selection.

Commercial Chillers

 

 

Close up of titanium helical coil insulated heat exchanger

digital controller

Close up of digital controller

Commercial Chiller dimension image

Commercial Chiller with Dimensions

CHL-9 with detached heat exchanger

CHL-9 shown above with detached heat exchanger

Our standard commercial chillers are available from 2 hp – 20 hp. These units include a high-quality helical, titanium heat exchangers for use in saltwater or freshwater. Units include built-in digital temperature controllers with dependable accuracy of +/- 2 degrees Fahrenheit. Most models are available in 3 phase. Contact us directly for help with sizing, pricing, and availability.

Titan Heat Pump

Standard Features:

  • Fresh or Saltwater Use
  • Helix Titanium Coil Heat Exchanger
  • Insulated Heat Exchanger
  • Digital Controller in NEMA4 enclosure
  • Automatic Temperature Ranging
  • Thermostat & Pump Down Control
  • Temperature Range Down to 40 deg. F
  • Water Flow Safety Switch
  • Stainless Steel Stand

 

Chiller Selection Chart

Model
Number
Horse
power
BTU/KW

Removal

Capacity

Volts/Phase
Amps
RLA/LRA
Flow

(gpm)

min/max

Length
x Width x

Height 
(in.)
CHL-1
2
24,000
230-240/1
9/58
20/40
41″
x
29.5″
x
53″
CHL-3
3
36,000
230-240/1
13.5/73
20/40
41″
x
29.5″
x
55″
CHL-4
3
36,000
230-240/3
12.6/74
20/40
41″
x
29.5″
x
55″
CHL-5
4
48,000
230-240/1
18.6/93
30/60
47″
x
29.5″
x
61″
CHL-6
4
48,000
230-240/3
15.6/101
30/60
47″
x
29.5″
x
61″
CHL-7
5
60,000
230-240/1
28.2/141
30/60
55″
x
29.5″
x
63″
CHL-8
5
60,000
230-240/3
21.6/139
30/60
55″
x
29.5″
x
63″
CHL-9
7.5
96,000
230-240/3
28/183
60/120
48″
x
42″x
68″
CHL-9-460
7.5
90,000
460/3
17/90
60/120
48″
x
42″
x
68″
CHL-10
10
120,000
230-240/3
40/278
60/120
58″
x
46″
x
68″
CHL-10-460
10
120,000
460/3
20/124
60/120
58″
x
46″
x
68″
CHL-12
12
150,000
230-240/3
50/312
120/180
53″
x
51.5″
x
72″
CHL-12
-460
12
150,000
460/3
12/75
120/180
53″
x
51.5″
x
72″
CHL-15
15
175,000
230/240/3
67.2/364
120/180
106″
x
41″
x
69″
CHL-15-460
15
175,000
460/3
30/190
120/180
106″
x
41″
x
69″
CHL-20
20
223,000
230-240/3
79.4/556
120/180
111″
x
41″
x
89″
CHL-20-460
20
223,000
460/3
28/248
120/180
111″
x
41″
x
89″

 

Looking for an alternative to Pacific Coast Imports commercial chillers? Visit our Online Store to buy JBJ Arctica Commercial Chillers at a great discount.